+86 180 8679 0390
Views:3 Author:Site Editor Publish Time: 2021-07-12 Origin:Site
First of all, we should pay attention to three problems when we choose slewing bearing: load, bolt strength and whether the bolt hole is uniform.
If the bearing is installed on the support surface which lacks integrity, local deformation will change the load, resulting in different load sizes of the bearing. If we do not take appropriate measures, it is easy to lead to the failure of slewing bearing.
The second point is whether the screw is strong enough to ensure the selection of slewing bearing products suitable for your installation. This stage is often overlooked, leading to the possibility of system failure. Therefore, we need to pay special attention to this issue.
Third, whether the bolt holes are uniform, because the fasteners need to be placed in more places than the maximum load area. The bolt hole can only be used as a dangerous support structure in the area where the maximum load occurs, so it should not be ignored in the overall design of the product. Uniform bolt rings help to reduce the bending and load distribution of bearings, fasteners and support structures.
The above three points are about the key points when purchasing slewing bearing. If you want to know more, you can pay attention to Xuzhou Helin Slewing Bearing Co., Ltd