+86 180 8679 0390
Slewing bearings (slewing bearings) are mostly used in some large mechanical equipment because they have to bear heavy load. Therefore, they will inevitably suffer certain friction and loss in the process of use. However, what's the matter with the rapid loss of slewing bearings?Excessive wear of sl
Characteristic of structure, performance and applicationThe single row crossed roller slewing bearing is composed of two seat rings, which design in compact structure and light weight, the clearance is small when assembly, so need high precision. The roller are 1:1 cross arranged, it can bear the ax
Spur gears or straight-cut gears are the simplest type of gear. They consist of a cylinder or disk with teeth projecting radially. Though the teeth are not straight-sided (but usually of special form to achieve a constant drive ratio, mainly involute but less commonly cycloidal), the edge of each to
For mechanical products, slewing bearing is an indispensable part, but sometimes we will find that it is inflexible. If it is inflexible, there will be a lot of trouble in use, and there is no way to work well. The following is to share the reasons and solutions of slewing bearing sticking or inflex
Slewing ring bearing can be used in a variety of mounting fixed forms.In order to meet some special application environment, the installation method may change.Some important details of the actual design of slewing ring bearing, such as the thickness of the mounting plate, the location and number of
1, What are the installation forms of the slewing ring?The installation forms of slewing bearings are mainly divided into three types: seat installation, suspension installation and vertical installation.2, Which materials are generally used for slewing bearings for processing?Mainly use 50mn, 42crm
Large gear tooth-by-tooth hardeningInduction hardening of small-, medium, and large-size gears is done using a tooth-by-tooth technique or encircling method. Depending on the gear size, required hardness pattern and geometry, gears are induction hardened by encircling the whole gear with a coil (so-
The isolation roller inside the slewing ring raceway is also called the isolation block, which is made of two materials: engineering plastics and metal.The role of the spacer in the slewing ring has exceeded the role of keeping, isolating and guiding the normal rotation of the rolling element, and i
Slewing Bearing of Rollix: Slewing Bearing of Rollix modelRollix Crossed Rollers Internal Gear07-0673-00, 07-0770-00, 07-0849-00, 07-0885-01,07-0946-05, 07-1075-01, 07-1140-13,07-1304-04, 07-1385-03, 07-1606-02, 07-1830-04, 07-1997-04, 07-2400-00, 07-2810-09Rollix Crossed Rollers without Gear08-022