Causes and solutions of inflexibility of slewing bearing

For mechanical products, slewing bearing is an indispensable part, but sometimes we will find that it is inflexible. If it is inflexible, there will be a lot of trouble in use, and there is no way to work well. The following is to share the reasons and solutions of slewing bearing sticking or inflexible movement.

1. The deformation or broken teeth of slewing bearing gear cause sticking or inflexible movement. The corresponding solution: repair the gear and re weld the gear.

2. There is a problem in the slewing bearing sealing system, which will cause the entry of debris, such as stones, sand, etc., causing stagnation or insensitive movement. The corresponding solution: clean up all the debris.

3. Overload operation results in inflexible movement of slewing bearing. The corresponding solution: need to reduce the workload.

4. The position of slewing bearing is not flat. The corresponding solution: need to change the platform position, work in a flat position.

5. There is a lack of lubricating oil in the slewing bearing. The grease will increase the friction and resistance, which will result in insensitive movement. The corresponding solution: add the same specification of lubricating oil or replace all the lubricating oil.

After knowing the causes and solutions of inflexibility of slewing bearing, we don't need to worry about this situation in the future.