+86 180 8679 0390
Gear is a kind of machine element which has teeth cut around a cylindrical or cone-shaped surface with equal spacing. They are used to transmit rotations and forces from the driving shaft to the driven shaft when a pair of these elements have meshed. There are different types of gear. They have a di
Large gear tooth-by-tooth hardeningInduction hardening of small-, medium, and large-size gears is done using a tooth-by-tooth technique or encircling method. Depending on the gear size, required hardness pattern and geometry, gears are induction hardened by encircling the whole gear with a coil (so-
The isolation roller inside the slewing ring raceway is also called the isolation block, which is made of two materials: engineering plastics and metal.The role of the spacer in the slewing ring has exceeded the role of keeping, isolating and guiding the normal rotation of the rolling element, and i
Slewing Bearing of Rollix: Slewing Bearing of Rollix modelRollix Crossed Rollers Internal Gear07-0673-00, 07-0770-00, 07-0849-00, 07-0885-01,07-0946-05, 07-1075-01, 07-1140-13,07-1304-04, 07-1385-03, 07-1606-02, 07-1830-04, 07-1997-04, 07-2400-00, 07-2810-09Rollix Crossed Rollers without Gear08-022
Slewing bearing is a kind of accessory that is used more now. In the process of daily use, it will show heat to some extent. If this situation cannot be dealt with in time, it will be relatively large damage to the bearing. I will introduce you today It is about what conditions will cause the slewin
1. As far as everything is normal, the slewing bearing contains the ring gear for the rolling drive and its anti-fouling sealing equipment. This equipment has a key effect on ensuring that all the slewing bearings are normal and low-speed and long-time load operation.2. The standard of roller bearin
Large gear tooth-by-tooth hardeningInduction hardening of small-, medium, and large-size gears is done using a tooth-by-tooth technique or encircling method. Depending on the gear size, required hardness pattern and geometry, gears are induction hardened by encircling the whole gear with a coil (so-
The isolation roller inside the slewing ring raceway is also called the isolation block, which is made of two materials: engineering plastics and metal.The role of the spacer in the slewing ring has exceeded the role of keeping, isolating and guiding the normal rotation of the rolling element, and i
Slewing Bearing of Rollix: Slewing Bearing of Rollix modelRollix Crossed Rollers Internal Gear07-0673-00, 07-0770-00, 07-0849-00, 07-0885-01,07-0946-05, 07-1075-01, 07-1140-13,07-1304-04, 07-1385-03, 07-1606-02, 07-1830-04, 07-1997-04, 07-2400-00, 07-2810-09Rollix Crossed Rollers without Gear08-022