+86 180 8679 0390
Design featuresThe internal configuration consists of a rectangular cross section with deep groove gothic arch raceways and maximum ball complement. This results in a four-point contact design that provides exceptional moment, thrust, and radial load capacities.
1, What are the installation forms of the slewing ring?The installation forms of slewing bearings are mainly divided into three types: seat installation, suspension installation and vertical installation.2, Which materials are generally used for slewing bearings for processing?Mainly use 50mn, 42crm
Slewing Bearing 011.75.4000 , external gear , OD 4376mm
Customized products From Xuzhou Helin Slewing Bearing Co.,Ltd
Xuzhou Helin Slewing Bearing has extensive experience in designing and manufacturing customized or special slewing bearings . We have servial series such as Single row ball series , Doubel row ball series , three row rollwe series , single row cross rolelr series , light type and Flange type .
Large gear tooth-by-tooth hardeningInduction hardening of small-, medium, and large-size gears is done using a tooth-by-tooth technique or encircling method. Depending on the gear size, required hardness pattern and geometry, gears are induction hardened by encircling the whole gear with a coil (so-
The isolation roller inside the slewing ring raceway is also called the isolation block, which is made of two materials: engineering plastics and metal.The role of the spacer in the slewing ring has exceeded the role of keeping, isolating and guiding the normal rotation of the rolling element, and i
Slewing Bearing of Rollix: Slewing Bearing of Rollix modelRollix Crossed Rollers Internal Gear07-0673-00, 07-0770-00, 07-0849-00, 07-0885-01,07-0946-05, 07-1075-01, 07-1140-13,07-1304-04, 07-1385-03, 07-1606-02, 07-1830-04, 07-1997-04, 07-2400-00, 07-2810-09Rollix Crossed Rollers without Gear08-022