Phone/Whatsapp:
+86-516-8788 0390
+86 180 8679 0390
+86 180 8679 0390
Gear is a kind of machine element which has teeth cut around a cylindrical or cone-shaped surface with equal spacing. They are used to transmit rotations and forces from the driving shaft to the driven shaft when a pair of these elements have meshed. There are different types of gear. They have a di
Why pinion is weaker than Gears of same material? When the different materials are used, the product of decides the weaker between the pinion and gear. The Lewis form factor is always less for a pinion compared with gear. When the same material is used for the pinion and gear, the pinion is always w
The slewing bearing has internal and external gears, and is usually processed by a gear hobbing machine or a gear shaping machine.
Slewing bearing & pinion gear & Flange & Motor .
Helical slewing ring , gear hardened .
Large gear tooth-by-tooth hardeningInduction hardening of small-, medium, and large-size gears is done using a tooth-by-tooth technique or encircling method. Depending on the gear size, required hardness pattern and geometry, gears are induction hardened by encircling the whole gear with a coil (so-
The isolation roller inside the slewing ring raceway is also called the isolation block, which is made of two materials: engineering plastics and metal.The role of the spacer in the slewing ring has exceeded the role of keeping, isolating and guiding the normal rotation of the rolling element, and i
Slewing Bearing of Rollix: Slewing Bearing of Rollix modelRollix Crossed Rollers Internal Gear07-0673-00, 07-0770-00, 07-0849-00, 07-0885-01,07-0946-05, 07-1075-01, 07-1140-13,07-1304-04, 07-1385-03, 07-1606-02, 07-1830-04, 07-1997-04, 07-2400-00, 07-2810-09Rollix Crossed Rollers without Gear08-022